CHRYSO®FINISOL

CHRYSO®FiniSol SR200 is a water-repellent and oil-repellent protective solution designed to protect concrete, including decorative concrete, against all types of stains. It can be sprayed and makes the substrate more resistant to water-based stains (vinegar, ketchup, wine, coffee, etc.) and oil-based stains (engine oil, vegetable oil, grease, etc.). Surfaces are also much easier to clean. It does not change the appearance nor the colour of the treated substrates and increases their lifespan. The application of the product gives the substrate a beading effect (water runs off the substrate without penetrating it), enabling users to make the distinction between treated and untreated concrete. The solution can be sprayed and applied to early-age concrete, as well as to pressed/vibrated concrete, as soon as it leaves the steam curing chamber. CHRYSO®FiniSol SR200 penetrates into the substrate by impregnation, making it resistant to abrasion (tested over 200 cycles as per ISO 11998).

CHRYSO®FiniSol SF100 is a water-repellent solution dedicated to concrete surfaces, and especially to aesthetic concretes. It confers to the substrate a better resistance to water stains (vinegar, ketchup, wine, coffee, …) and makes it much easier to clean. It greatly improves its resistance to freeze-thaw cycles, even in the presence of de-icing salts. It does not change the appearance or the color of the substrate and increases its strength and durability.

CHRYSO®FiniSol Perle is a solvent-based concrete sealer designed to protect aesthetic concrete and to give concrete a wet glossy aspect. CHRYSO®FiniSol Perle does not yellow the substrate (accelerated ageing test – NF EN ISO 11-507) and shows a good resistance to abrasion and wear (ISO 11-998 and ASTM D24-56).

CHRYSO®FiniSol Mat is a water-based concrete sealer designed to protect aesthetic concretes.  CHRYSO®FiniSol Mat does not modify the aspect and the colour of the substrate on which it is applied.

CHRYSO®FiniSol Brut is a water based concrete sealer designed to protect aesthetic concrete, especially on concrete at early ages (12 to 24 hours after concrete casting). This product is particularly adapted to protect exposed aggregate concrete, on which it can be applied immediately after the wash out of the surface retarder. CHRYSO®FiniSol Brut has a tracing effect that helps to see the treated areas and to optimize the dosage. The white aspect totally disappears when dried.